![]() ![]() LG Stock Firmware (for particular devices)įirst, install the LG Mobile driver on your PC.īut these extensions are only found on firmware files of LG devices.#Lg firmware tool 2014 install#įor installing download the zip file from the link and then extract and then install it on your PC. This will let connect the Phone with PC via USB cable. Otherwise, you won’t be able to flash firmware on LG phones. Once it’s done then you can follow the procedure to flash KDZ & TOT firmware on LG phones. Note: To see if your device is connected or not. Open device manager and there if you see yellow marks under other devices. Then the driver is not properly installed or your phone is not in download mode. Download and extract the LG Flash Tool and then open the LG flash tool.Also, download the firmware for your LG device from the link given above.Now press and hold ‘Volume Up button’, while holding connect the phone with the PC using a USB cable.This will boot the phone into download mode. Now in LG Flash Tool don’t change anything.Only browse and select the KDZ or TOT firmware from the stored location. Then select ‘ normal flash‘ if you want to upgrade or downgrade the phone, it will not delete any data.And select ‘ CSE flash‘ if you want to delete the whole data of the device. After selecting normal or CSE flash click on start then a popup will appear after a few seconds.ĬSE flash is recommended when the phone is in bootloop or stuck at logo. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |